Activated carbon filter element

Activated carbon filter element is using activated carbon particles to add bond temperature sintering, continuous extrusion molding, the filter element has the excellent adsorption performance of particle activated carbon, with the precision filter characteristics of pipe elements, has a good adsorption effect, can effectively remove the particles in the water, rust, residual chlorine, odor, color, organic matter, etc.

The inner layer of the filter element is a polypropylene skeleton to strengthen the pressure resistance strength of the filter element.The skeleton is covered with two layers of polypropylene microfiber felt that can intercept the liquid through the carbon core and bring out particles greater than 10 microns.The outer layer of the carbon core is covered with 20% of polypropylene superfiber felt, which can intercept the particles greater than 10-20 microns in the liquid, making the filter element has the dual function of filtration and purification.The outermost layer is a white plastic mesh cover, making the filter element has a complete appearance and clean appearance.Both ends of the filter element are equipped with soft fine rubber end cover, so that the filter element has good sealing after loading into the filter cylinder.

Carbon fiber filter element, made of nano-scale superfiber, has more efficient adsorption performance.

Performance characteristics

·Set adsorption, filtration, interception, catalysis in one;

·Acid resistance, alkali, salt and various different organic solvents;

·High filtration accuracy, high flow rate, small pressure difference, high pressure resistance strength, large pollution volume, non-toxic and tasteless, and no secondary pollution.

Technical parameter

·Working pressure drop: 0.1-0.2kgf/cm

·Maximum bearing pressure: 7kgf / cm

·Maximum pressure difference: 4kgf / cm

·Maximum operating temperature: 60 degrees

·Maximum flow: 8 L/min (0.15Kgf / cm, 10 inch)

·Surface area: 800-1,000 ㎡ / g

·External diameter of the filter element: 65mm

·Internal diameter of the filter element: 30mm

·The filter element length: 10,20,30,40 inches

·Iodine adsorption value: 900mg / g

·Benzene adsorption amount: 20-25%

·Methylland adsorption value: 13-16ml / g

·COD removal rate: 58.25%

·Residual chlorine removal rate: 96.83%

Main application

·Can be widely used in pure water, semiconductor, electroplating wire, printed circuit board, compressed air, gas filtration;

·Chemical industry, petrochemical industry: solvent, coating, magnetic slurry, detergent, liquid wax, etc.;

·Pharmaceutical and pharmaceutical industry: hospital water, pharmaceutical needles, medium liquid, etc.;

·Food industry: food, beverage, drinking water, alcohol, etc.