Microporous folded membrane filter element

The microhole folding film filter element is formed of superfiber film and non-woven cloth or wire mesh fold. The filter element shell, center rod and end cover are processed by hot melt welding, without leakage and pollution-free.According on the operating conditions and filter media, there are a variety of fiber membranes: polypropylene (PP), polyether sulfone (PES), polytetrafluoride (PTFE), nylon 6 (N6), polyvinyrene dene fluoride (PVDF).

Qualification

·Filter accuracy: 0.1,0.22,0.45,1,5,10,20,30,60 μm

·Sealing materials: silicone rubber, fine rubber, ternary ethylene propylene rubber, fluorine rubber

·Effective filter area: 0.6 ㎡ / 10″

·Diameter of filter element: outer diameter 69mm, inner diameter 28mm

·Length of the filter element: 10 “, 20″, 30 “, 40″

·Maximum operating temperature: 80℃,0.28Mpa

·Maximum positive pressure difference: 0.42Mpa

·Maximum reverse pressure difference: 0.28Mpa

·Sterization conditions: 121℃ for 30min

·Interface form: leveling, 222 interface, 226 interface, threaded interface, customized other interfaces

Product characteristics

·Hydrophilic filter membrane, with uniform pore diameter distribution, high porosity, high flow rate and particle retention rate;

·With good temperature resistance and acid-base resistance performance;

Application area

·Electrons: prefiltration of reverse osmosis water system, prefiltration of deionized water system, pre-filtration of chemical filtration and pure water filtration;

·Medicine: pharmaceutical, biological and plasma product filtration, compressed air and gas filtration;

·Food and beverage industry: mineral water, beverage, fruit juice, wine filtration;

·Chemistry: organic solvent, ink filtration;

·Oil: oilfield water injection filtration;

·Filtering of plating solution, metal cutting solution, photoresist, and magnetic media.